Many people opt to have concrete flooring around the exterior of their homes, and some choose to have it installed in the interior of their homes. Concrete staining in northern Virginia is inexpensive, hardwearing and easy to maintain, making it a practical flooring option.

However, if completely neglected concrete flooring can become very unclean, can become a host to mold and mildew, and begin to look very unattractive. Read on to find out how best to clean your concrete floor and keep it looking good.

Cleaning tools

The best cleaning tools for cleaning interior concrete floors include a synthetic-bristled broom, a mop, mild cleansing liquid, and large old cotton towels.

For exterior concrete make sure you have a synthetic-bristled broom, mild cleansing liquid, and a hosepipe at hand. If your flooring has stains, then have some bleach and dry laundry detergent at hand.

Basic cleaning

For basic cleaning of your concrete floor first, take the synthetic-bristled broom and use it to gently scrub the floor, in order to dislodge any dust or debris trapped on the surface of the concrete.

If you are working on an exterior floor, such as concrete driveways, your next step should be to hose down the entire floor surface area, to remove dust and debris and general dirt.

You can wash the floor with some mild cleaning liquid if you wish, by pouring a mix of water and mild cleaning liquid onto the floor and gently scrubbing with the broom.

For interior flooring, use a mop with mild cleaning liquid instead. Dry the floor with large old cotton towels and mop the entire area until completely clean.

Stain removal

For stains on exterior concrete flooring, you can apply diluted bleach. Pour the diluted mixture onto the stain and leave it for several minutes. After some minutes are up, pour hot water onto the stain and scrub with a synthetic-bristled brush. Continue repeating this method until the stain is removed.

For interior stains, use dry laundry detergent on the stain and leave to sit for 10 minutes. After 10 minutes, scrub the stained area with hot water and a synthetic-bristled brush. Repeat until the stain is removed.

Seal treatment

Make sure that you use a floor sealing treatment every one to three years, in order to preserve your concrete floor. To protect the concrete from wear and tear and from environmental factors that remove concrete perfection, a floor seal treatment is used.

Untreated floors can become prone to moisture damage, which can result in mold and mildew forming.

General maintenance

For general maintenance of your concrete floor, use a soft-bristled brush to sweep over the area and to keep dust and debris from settling into the concrete.

For interior flooring, it is a good idea to use floor mats to cut down traffic damage, and use floor protectors on the legs of chairs and other pieces of furniture to prevent scores and scratches from forming.

Staining concrete floors

In most cases, concrete floors are neglected because people tend to believe that they are indestructible or meant to be abused. This could not be any further from the truth as concrete floors do become damaged over time just like any other floor.

Relaying concrete is not only costly but is very time consuming and requires back-breaking labor. Staining concrete floors is one way to keep them properly maintained and in use for years on end.

Getting hold of the right materials

To begin, the first thing a person must do is acquire the materials needed to perform the staining. Because concrete staining must be preceded by an acid wash, it is important to make sure that safety measures like rubber gloves and protective eye gear are worn at all times.

Other materials needed are a bucket, broom, rollers, concrete cleaner, and the sealer. Once all the materials have been accumulated, remove all materials and items that sit on the floor and place them in another room or outside.

Then thoroughly clean the entire surface area of the decorative concrete of Virginia floor to get rid of all dirt and grime. This may take a while, especially in wreck rooms and garages because they tend to be cluttered with a large number of miscellaneous materials.

Applying acid wash

It is time to apply the acid wash to the floor after the floor is properly cleaned. This is the most dangerous part of the process and where protective gear should be worn because the acid can be hazardous to work with. This allows the do it yourself to make sure each area is done most effectively.

Using baking soda

When the acid stain is dried and has taken effect, scrub the floor with a baking soda and water to clean any residues left by the acid stain. Once this is completed and dried, it is time to apply the sealer.

Sealer and stain are the same things and this should be spread on evenly in quadrants, much like the acid wash. To give the concrete floor the protective coat it needs, let this dry and repeat if necessary.

LEAVE A REPLY

Please enter your comment!
Please enter your name here